| Product model |
PLC-HS302 |
| Form Factor |
Bullet Camera |
| Product Colour |
White |
| Antenna |
external antenna |
| Materials |
ABS + PC + Anti - UV |
| Surface Finishing |
matte face |
| waterproof level |
IP66 |
| Dimension(L*W*H)(mm) |
Ø67*110mm |
| Flash |
8MB |
| optics |
4.0mm，F2.6 aperture, waterproof |
| Viewing angle |
D:92°*H:78*V:42° |
| Image circle |
Ø6.9 |
| Dimension |
M12*22.9mm |
| Sensor Type |
GC2063 |
| Resolution |
2304*1296 Pixel |
| Night Vision |
8M distance (850nm) |
| IR-LED |
2pcs 3030（IR+White）led |
| WHITE-LED |
10m(850nm), White light colour temperature：4000K（pure white） |
| IR-CUT |
Pendulum IR-CUT |
| photosensitive threshold |
Colour cut black ≤0.9Lux； Cut the black colour≥ 8.5Lux |
| Working Indicator |
red green light*1 |
| Standard |
RTL8188FTV |
| Mic |
Full duplex, sensitivity: ≥-32±3dBm, IP66 waterproof |
| Speaker |
Built-in 8 ω /1W |
| TF Card |
Max support 128G |
| Button Switch |
Reset *1 |
| Ethernet |
Aside: JL1101 |
| Antenna |
3DBi * 2 |
| Wifi Maximum rate |
45Mbps |
| Wifi distance |
open≥150m |
| Wifi standard |
IEEE 802.11 b/g/n, single frequency 2.4G |
| Power Supply |
USB Port 5V |
| Operational power consumption |
Max 4.5W |
| I/O Input port |
TF Card*1, Mic*1 |
| I/O Power port |
USB2.0,2P/1.5mm， 3M long |
| I/O Output port |
Speaker*1； |
| I/O key type |
Reset*1； |
| I/O Indicator light |
Red and green two-colour indicator light*1； |
| Echo cancellation |
Support |
| Two-Way Talk |
Support |
| Start-up the bell |
Support |
| Rest the bell |
Support |
| Compression method |
G.711A |
| Video Format |
H.264 |
| Video frame rate |
Day：20fps; Night：15fps |
| Resolution & frame rate |
2304*1296 Pixel, Multi-bit stream, adaptive； |
| IR turned ON |
Enable night vision view, IR, ICR auto detection |
| IR turned OFF |
Disable night view, turn off infrared, ICR stays in day view mode； |
| Andorid |
Android 4.3+ |
| IOS |
IOS 9.X-10.X more |
| Mobile APP |
Cloud Edge |
| Cloud platform |
Amazon |
| Language |
Chinese， English， French， German， Italian， Spanish， Japanese |
| Basic function |
Support configuration/real-time preview/screenshot/playback/intercom/video adjustment/recording/ PTZ/cloud storage |
| Cloud recording storage |
Support |
| Online visitor |
Max 5 user |
| Type of Alarm |
Support push message, sound and light alarm |
| Detection Sensitivity |
low/medium/high, default medium |
| Audible alarm |
Sound and light alarm: default white light alarm; |
| Remote control and monitoring |
Support |
| Power failure memory |
Support |
| Onvif |
Optional |
| Noise detection |
Support |
| Privacy protection |
Lens On / Lens Off / Timing Management / Geofencing |
| playback recording mode |
All-day/event recording is optional, and event recording is enabled by default |
| Recording Time |
1min/2min/3min/off optional, off in default |
| Pairing |
QR code add, AP hotspot |
| OTA upgrade |
Support |
| Green Light slow flash |
preview image |
| Green Light Always bright |
Unreviewed image |
| Green Light Always bright |
online |
| Green Light slow flash |
running normally |
| Red Light slow flash |
The device enters this state when it is powered on and no network is configured |
| Red Light slow flash |
Duration: Indicates the duration until the standby network exits |
| Red Light Quick flash |
Duration: Until the network is configured successfully |
| Green Light Quick flash |
Until the upgrade succeeds or fails - (the green light is always on when the upgrade is successful) |
| Red Light Red light quick flash |
The network status is the same as device |
| Reset the device |
Red light flashes slowly -> red light flashes quickly -> green light is always on; The red-light flashes slowly when the network is not configured. When the user connects to the 2.4G network and scans the code for the device, the red-light flashes quickly; The red-light flashes quickly to indicate that the server is being connected; the indicator is steady green, the network is online successfully; |
| Restart the device |
Red light flashes slowly > red light flashes quickly -> green light is always on |
| Broken network |
Red light flashes quickly |
| Package |
Pearl cotton, giftbox, 3m USB cable, positioning sticker |
| Temperature setting |
working： -20 ~ 60 ℃, Humidity <95% Storage：-25 ~ 65 ℃, Humidity <95% |
